Filter
Top Products
NOTICE
The end-of-step signal is activated as default for the last cooking step
of a program.
1. Press the left select button (13) when entering a cooking
program.
2. Select the end-of-step signal with CombiDial (9).
3. Press the left select button (13) to return to the settings menu.
4.12 Changing standard settings
Requirements Unit is switched on
1. Press the left select button (13) to open the menu.
2. Use CombiDial (9) to select the “Settings” menu.
3. Use CombiDial (9) to enter the password “111”.
4. Press Star t /Stop (8).
5. Select the parameter with Com biDial (9).
The multi-function display (4) shows the set value.
The parameter name flashes.
6. Press CombiDial (9), to change the value.
The parameter value flashes.
7. Change the value with Co mbiDial (9).
8. Press the right select button (6) or CombiDial (9) to adopt
the value.
The parameter name flashes.
9. Change other parameters as necessary.
10. Press the right select button (6) to save the changes.
or
→
Press the left select button (13) to discard the changes.
4.12.1 Set service interval water volume
In the “Settings” menu, you can specify the service interval by means
of the volume of used water.
1. Press the left select button (13) to open the menu.
2. Use CombiDial (9) to select the “Settings” menu.
57Operating manual
Global Foodservice Solutions
Operation
SmartCombi
™