Filter
Top Products
2-17
Henny Penny Model OE-100
2-19. COOLING FAN
MAINTENANCE
(Continued)
5. Close door and turn power switch on. Unit is now ready for
operation.
If the fan needs a more thorough cleaning, or E-4 persists after
cleaning the fan guard, follow the following steps.
1. With power on, open door to drain pan and look up at fan to
make sure fan is operating.
2. If fan is not operating, it needs replaced; if fan is operating
continue onto step 3.
3. Remove electrical power supplied to the unit.
Place the power switch to the OFF position. Disconnect the
power cord from the wall, or turn off wall circuit breaker or
fuse, or electrical shock could result.
4. Remove the screws securing decorative strips on both sides
of the control, and remove decorative strips.
5. Swing panel out to the left and locate fan on the left behind
panel.
6. Thoroughly clean fan, plus check fan guard per above in-
structions.
7. Replace panel and decorative panels.
8. Restore power to unit and unit is now ready for operation.
294