Filter
Top Products
--- 23 ---
* Be careful not to damage Washer (F) [3]. (Fig. 21)
Washer (F) has an oval shape to fit the inside of the Gear Cover [31]. Therefore, perform disassembly and
reassembly so that washer (F) is properly aligned with the shape of the gear cover.
*Be careful of the direction of the Cord Clip [78]. (Fig. 22)
*Precaution when mounting the Armature Ass'y [70] in the Housing [40]
Prior to mounting the Armature Ass'y [70] in the Housing [40], press-fit the Ball Bearing 6001VVCMPS2L [67]
to prevent the Armature Ass'y [70] from becoming dislodged from the ball bearing portion at the fan side
when removing the Armature Ass'y [70] from the Housing [40]. (Fig. 9)
Fig. 22
Fig. 21
Cord dia.: More than 6.4 mm,
8.5 mm or less
Cord dia.: More than 8.5 mm,
10.8 mm or less