Hobart KA7E Convection Oven User Manual


  Open as PDF
of 36
 
– 12 –
SAVING OR VERIFYING A COOK PROGRAM (Program 1 – 9)
Begin from Idle Mode.
Program display shows last operated program (0 – 9).
•  Select a program (1 – 9).
Program 0 is Manual Mode and cannot be saved into
memory.
•  Press 
P
for 3 seconds to enter programming mode.
The program display shows the program/number being
modied or veried (1 – 9).
Cooking 'Step 1' LED is lit.
Time display blinks.
•  Enter  the  desired  cook  time  from 0:01  (1  minute)  to  6:00 
(6 hours).
•  Press 
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
Entering 0:00 for the time turns step 1 off and skips to
step 2.
Temperature display blinks.
•  Enter the desired cook temperature from 180 to 482 (degrees 
Fahrenheit).
•  Press 
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
Cooking 'Step 2' LED is lit.
Time display blinks.
•  Enter  the  desired  cook  time  from 0:01  (1  minute)  to  6:00 
(6 hours).
•  Press 
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
Entering 0:00 for the time turns step 2 off and skips to
step 3.
Temperature display blinks.
•  Enter the desired cook temperature from 180 to 482 (degrees 
Fahrenheit).
•  Press 
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
EXAMPLE PROGRAM
Temperature Time
Step 1 375 1:20
Step 2 425 0:05
Step 3 325 0:05
Step 4 200 HOLd
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1 2 3 4
0
P 1
1:20
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1 2 3 4
P 1
1:20
375
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1 2 3 4
P 1
0:05
0
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1    2 3 4
P 1
0:05
425
PROGRAMMING # 1
ENTER STEP1 TIME
PROGRAMMING # 1
ENTER STEP1 TEMP
PROGRAMMING # 1
ENTER STEP2 TIME
PROGRAMMING # 1
ENTER STEP2 TEMP
 previous next