– 30 –
DRIP STRAINERS
ARE SEATED
Fig. 43
Fig. 45
REPLACE DRIP STRAINERS PROPERLY
11. The notch in the drip strainer must be placed around the
water pipe and block tting (Fig. 43).
12. Drip strainers must be seated (Fig. 44).
• Tabs under the drip strainer handles t slots in the wash
arm support.
• Both handles are in the middle.
13. Wash arm spins freely (Fig. 45).
WIPE OFF EXTERIOR
14. Wipe exterior stainless steel surfaces with a moist cloth,
using care not to apply excess moisture to the keypad in
the controls area. Do not hose down.
NOTCH ON SIDE
OF DRIP STRAINER
WATER PIPE AND
BLOCK FITTING
Fig. 44
Q