Filter
Top Products
– 13 –
Cooking 'Step 3' LED is lit.
Time display blinks.
• Enter the desired cook time from 0:01 (1 minute) to 6:00
(6 hours).
• Press
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
Entering 0:00 for the time turns step 3 off and skips to step
4.
Temperature display blinks.
• Enter the desired cook temperature from 180 to 482 (degrees
Fahrenheit).
• Press
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
HOLd 'Step 4' LED is lit.
Time displays HOLd. 'HOLd' time is innite and cannot be
set.
Temperature display blinks.
• Enter the desired Hold temperature from 140 to 230 (degrees
Fahrenheit).
An invalid entry produces a double beep.
An entry of 000 for the temperature turns HOLd off.
• Press
ENTER
to accept (or, press
CLEAR
to void and reenter).
An invalid entry produces a double beep.
The controller returns to Idle Mode, any programmed steps
for the selected program are indicated by illuminated LEDs.
Step 1 LED is lit – indicates cook step 1 is programmed.
Step 2 LED is lit – indicates cook step 2 is programmed.
Step 3 LED is lit – indicates cook step 3 is programmed.
Step 4 LED is lit – indicates HOLd, step 4, is
programmed.
If no Step LEDs are lit – the program is cleared.
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1 2 3 4
P 1
0:05
0
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1 2 3 4
P 1
0:05
325
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1 2 3 4
P 1
HOLd
200
TEMPERATURE
TIME
F
C
PROGRAM
AM
PM
STEP
1 2 3 4
P 1
9:30
425
PROGRAMMING # 1
ENTER STEP3 TIME
PROGRAMMING # 1
ENTER STEP3 TEMP
PROGRAMMING # 1
ENTER STEP4 HOLD
PROGRAM # 1
SAVED