Filter
Top Products
– 14 –
Bring support bracket into position to support the inlet piping and install 2nd bolt
on chamber.
Disconnect the electrical power to the dishwasher and follow
lockout / tagout procedures. There may be multiple circuits. Be sure all
circuits are disconnected.
Remove the cover on the steam solenoid valve enclosure and remove knock-out
closesttowherethecordwillberouted.Installthestrain-reliefttinginthevalve
enclosure and connect the lead wires to the appropriate terminals. Install the valve
cover.
Condensate Return Piping
Install the top half of the support bracket to the bottom of the blower dryer as shown
in Figure 17.
2nd SUPPORT BRACKET BOLT
Fig. 16
SUPPORT BRACKET
Fig. 17