Hobart ML-138211 Dishwasher User Manual


 
– 4 –
CLe-Series
Fig. 1
DRILL HOLES
Position the hole template/stiffener (Fig. 2) over the existing bolt heads on the
unload end of the dishwasher per directions on template. Mark hole locations and
drill necessary holes per template. Hole diameters shown in Fig. 2.
For CLeR machines only, position the CLeR blower-dryer template (Fig. 2A) on the
CLeR hood assembly. Mark hole locations and drill necessary holes per template.
See Fig. 1A.
CLeR-Series
Fig. 1A
HOLE
TEMPLATE / STIFFENER