Filter
Top Products
– 16 –
DRAIN CONNECTION
AT EITHER END
PANEL ASSEMBLY
Position front and rear panels and bolt in place with 1/4-20 truss head bolts provided.
DRAIN CONNECTION
Plumbing connections must comply with applicable sanitary,
safety and plumbing codes.
Plumbing equipment for drain is not supplied.
Connect the 1" drain connection under the blower-dryer to a suitable drain (Fig. 23).
The drain for the blower-dryer requires only one connection to the drain. On CLe
models only, the drain can be connected to the end of the common drain pipe (Fig.
24)forthedishwasherunitoritcanbeindependentlyconnectedtotheoordrain.
To connect to the dishwasher unit, remove the pipe plug from the common drain
pipeandconnecttheblower-dryerdrainusingappropriatettings(notsupplied).
REAR PANEL
FRONT PANEL
Fig. 22
Fig. 24
Fig. 23