Cornelius PR150 BC Beverage Dispenser User Manual


 
IMPORTANT:
TO THE INSTALLER.
It is the responsibility of
the Installer to ensure that
the water supply to the
dispensing equipment is
provided with protection
against backflow by an air
gap as defined in
ANSI/ASME A112.1.2-1979;
or an approved vacuum
breaker or other such
method as proved effective
by test.
Water pipe connections
and fixtures directly
connected to a potable
water supply shall be
sized, installed, and
maintained according to
Federal, State, and Local
Codes.
Operator’s Manual
THE PROFILEtICE/DRINK DISPENSER
Model: PR150 BC
PRINTED IN U.S.A
IMI CORNELIUS INC; 2001–2007©
IMI CORNELIUS INC
www.cornelius.com
Telephone (800) 238–3600
Part No. 620918702
October 5, 2001
Revision Date: February 27, 2007
Revision: D
THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
This Manual must be read and understood before installing or operating this equipment