Filter
Top Products
12620918702
69
66
67
65
73
77
FIGURE 4. AUGER ASSEMBLY
CLEANING AND SANITIZING INSTRUCTIONS
WARNING: Disconnect electrical power to the dispenser before cleaning. Do not use metal
scrapers, sharp objects, or abrasives on the ice storage hopper, top cover, and the agitator
disk as damage may result. Do not use solvents or other cleaning agents as they may
attack the plastic material.
Soap Solution – Use a mixture of mild detergent and warm (100° F) potable water.
Sanitizing Solution – Use 1/2–ounce of household bleach in one gallon of potable water. Preparing the sanitiz-
ing solution to this ratio will create a solution of 200 PPM.
Cleaning Dispenser
1. CLEANING EXTERIOR SURFACES
IMPORTANT: Perform the following daily.
A. Remove cup rest from the drip tray.
B. Wash the drip tray with soap solution. Rinse with potable water and allow solution to run down the
drain.