Filter
Top Products
10
Operating Your Kambrook Power Drive
Stick Mixer continued
• Place the jug on a damp cloth
during blending. This will keep the
jug stable.
• Do not operate the appliance
continuously for more than 1
minute. Allow the motor to rest for
1 minute between each use.
If food becomes lodged around
the processing blade or in the
blade guard, follow the following
safety instructions:
1. Release the ‘VARIABLE’ or ‘BOOST’
button, switch the power off at
the power outlet and unplug the
cord.
2. Use a spatula to carefully dislodge
the food. Do not use fingers as the
blades are sharp.
3. After the food has been removed
and blades are clear, plug the
appliance back into the power
supply, switch the power on and
continue blending.
To Attach the Chopping
Blade, Chopping Bowl
and Lid
Remove blending shaft from motor
body as per Page 9.
NOTE: The chopping blade is
extremely sharp and should
be handled only by the upper
plastic section.
Place the blade onto the metal pivot
pin in the base of the chopper bowl
(See Fig 5). Place the food inside the
chopper bowl. Do not exceed the
maximum (MAX) marking.
Fig. 5
Place the lid onto the chopper bowl
and turn the lid in clockwise direction
until the lid clicks and locks onto the
chopper bowl (See Fig 6).
Fig. 6