Filter
Top Products
8
Operating Your Kambrook Power Drive
Stick Mixer continued
To Attach the Stainless Steel
Blending Shaft
Hold the shaft with the blades down,
and
the indicator symbol on the
top end of the blending shaft with the
corresponding indicator symbol on
the end of the motor body. Screw the
motor body in a clockwise direction
until the
indicator symbol on the
motor body is aligned with the
indicator symbol on the blending
shaft (See Fig 1).
Always ensure the blending shaft
is dry, and no water is left inside,
before reattaching.
Fig. 1
To Use the Hand Blender
Ensure the blender is completely
and properly assembled as detailed
above.
1. Place food to be processed into
the jug provided (or a sufficiently
large mixing bowl or saucepan).
The jug provided should be only ½
full or less when blending liquids or
when making a puree of fruit and/
or vegetables (See Fig 2).
2. For food preparation tips and
recipes refer to page 14 and the
recipe section.
Fig. 2
3. Insert the plug into a
230V or 240V power outlet
and turn the power on.
4. By turning the Variable Speed
Control dial on top of the motor
body, select a speed between
MIN and 5.
5. Place the blending shaft as
deeply as possible into the jug,
press and hold the ‘VARIABLE’
button to turn the blender on. The
button must be kept depressed
for the required duration of
operation.
6. If extra turbo power is required
when blending, press the ‘BOOST’
button.
7. Work through the ingredients in
the jug with a gentle raising and
lowering motion.
8. Switch off the motor by releasing
the ‘VARIABLE’ or ‘BOOST’ button.
9. Ensure the motor has completely
stopped before lifting the blender
out of the jug.
10. When processing has finished,
switch off at the power outlet and
remove the power plug.