Filter
Top Products
11
Align the top end of the chopping
bowl lid with the corresponding end
of the motor body and press down
(See Fig 7).
Ensure chopper bowl lid is dry with no
water left inside before reattaching.
Fig. 7
NOTE: Always place the
chopping blade on its pivot
pin on the bottom of the bowl
BEFORE placing any stuff in
the bowl. Do not lift the blade
before the chopping operation
is finished.
To Use the Chopping Bowl
For food preparation tips and
recipes refer to page 14 and the
recipes section.
Ensure the chopper is completely and
properly assembled as detailed on
the previous page.
1. Insert the plug into a
230V or 240V power outlet
and turn the power on.
2. Select a speed between MIN
and 5 on the Variable Speed
Control Dial.
3. Press the ‘VARIABLE’ button to turn
the appliance on and start the
chopping blade.
4. Press and hold the ‘BOOST’ button
if extra power is required when
processing or chopping.
5. When processing has finished
switch off the motor by releasing
the ‘VARIABLE’ or ‘BOOST’ button,
switch off at the power outlet and
remove the power plug.
6. Detach the chopping bowl and
lid (refer to instructions to right).
Remove the lid from the chopper
bowl. Carefully remove the
chopping blade and use a spatula
to scrape off any attached food
back into chopping bowl. Use a
spatula to remove food from the
chopping bowl.
Fig. 8