Filter
Top Products
Sequencer P1
29
IntroductionOperationParametersAppendix
1–7: Preference
Here you can make overall settings for the entire song, recording settings for
MIDI tracks, audio tracks, and mixer events, and settings for playback.
1–7h: Recording Setup
Use the radio buttons to select the realtime recording method.
When you record using
Overwrite
, the new data will be recorded over (i.e., will
replace) the previously recorded data.
When Overwrite recording a MIDI track, the musical data that was previously
recorded in measures later than the measure at which recording began will be
erased. However this is not the case for audio tracks; the previously recorded
data will be overwritten only in the measures which are actually re-recorded,
and the previously recorded data in subsequent measures will remain.
When you record using
Overdub
, newly recorded audio tracks will be overwrit-
ten over the previously recorded data, just as with Overwrite recording. How-
ever when mixer events are recorded, they will be added to the previously
existing data.
Recording is not possible when Loop is selected.
As when recording MIDI tracks, you will first use
Overwrite
to record the data.
If you wish to use realtime recording to modify previously recorded data, use
Auto/Manual Punch In
. To modify individual events (for example to insert part
of an orchestra hit), you can use the editing commands of “5–3J: Audio Event
Edit” to
trim
(
☞
page 39 of this manual), move, or
copy
the data.
1–7h
Page Menu