Filter
Top Products
12
Ice Storage Bin
The ice storage bin is located below the automatic
dispensing ice maker.
To remove and install ice storage bin:
• To remove bin, remove Ice Cream
Shelf. Raise ice maker arm to
deactivate ice maker.
• Lift front of bin and pull out to its full extension. Lift up
front of bin and remove.
• To install, slide bin into rails below ice maker until
bin locks into place. Drop ice maker arm to activate
ice maker, and replace Ice Cream Shelf.
IMPORTANT: Ice bin must
be locked in proper place for
proper ice dispensing. If freezer
door does not close, bin is not
in proper location. Turn auger
driver as shown to properly align
ice bin with back of unit.
Freezer Features
Ice Cream Shelf
The Ice Cream Shelf provides a space for items to be
chilled or frozen quickly.
• To remove, lift Ice Cream Shelf
from ice bin rails and pull
straight out.
• To install, reverse above
procedure.
Automatic Dispensing Ice Maker
This ice maker creates the ice used in the dispensing
system.
Using Ice Maker for the First Time
• Confirm ice bin is in place
and ice maker arm is down.
• After freezer section reaches
between -18° to -17° C, ice
maker fills with water and
begins operating.
• Allow approximately 24 hours
after installation to receive first harvest of ice.
• Discard ice created within first 12 hours of
operation to verify system is flushed of impurities.
Operating Instructions
• Confirm ice bin is in place and ice maker arm is
down.
• After freezer section reaches -18° to -17° C, ice
maker fills with water and
begins operating. You will
have a complete harvest
of ice approximately every
3 hours.
• Stop ice production by
raising ice maker arm until
click is heard.
• Ice maker will remain in the off position until arm is
pushed down.