Filter
Top Products
6
What if my doors are not aligned?
• Locate the higher door, and turn front adjustment screw
counterclockwise. Continue until doors are level.
• If bottom of adjustment range is reached, and doors are
not level–raise opposite door by turning front
adjustment screw clockwise.
• Replace toe grille
Turn both front adjustment
screws (A) clockwise to raise
and counterclockwise to
lower.
2
CAUTION
!
• To avoid damage to walls and flooring, protect soft vinyl or other flooring with cardboard, rugs, or other protective material.
• To avoid damage or breakage to adjusting bolt, do not use power tools to correct leveling.
• DO NOT adjust unit to be any shorter than 173.9 cm tall (minus hinge and cap). Doing so may damage underside
components.
Turn both rear adjustment
screws (B) clockwise to raise
and counterclockwise to
lower.
3
B
A
Check with level to verify 6 mm tilt to the
back for proper door closure.
• If unit is aligned and stable, replace toe grille.
4
How to Level Your Refrigerator
Materials Needed
•
3
/
8
" hex head driver • Level
What if my unit rocks?
• Turn rear adjustment screw clockwise to raise
rocking corner.
• Replace toe grille.
Installing Your Refrigerator
How to Install the Handles continued
How to Connect the Water Supply
• Contact a qualified engineer to perform this task.
Remove Toe Grille and
Bottom Hinge Covers
• Open both doors 180°, or as wide as
possible, to remove.
1