Filter
Top Products
Calibrating the sensors
Automatic calibration
To ensure trouble free operation, the
sensors
–
need to be recalibrated after
installation and each time the
electricity supply fails, e.g. after a
power cut.
The safety lock indicator lamp lights
up during automatic calibration, and
the hob cannot be switched on.
–
adjust themselves constantly whilst
the hob is in use.
If automatic calibration is unsuccessful,
an A lights up in the cooking zone
display on the left and right at the front,
and an F lights up on the left at the
back. Numbers light up in the cooking
zone display on the right at the back
and in the Timer/Memory display.
If this is the case, recalibration will have
to be carried out manually.
Manual calibration
^
Make sure that there is no direct light
(from the sun or from an artificial
source) falling onto the hob. The area
surrounding the hob must not be too
dark, nor should the relationship
between light and shade be
constantly changing.
^
Make sure that there is nothing
covering the sensors or the hob.
Take any pans off the hob and wipe
away any food deposits.
^
Interrupt the power supply to the hob
for approx. 1 minute.
Reconnect the hob to the electricity
supply. The electronic unit will reset the
sensitivity levels of the sensors.
If this does not solve the problem,
please call the Miele Service
department.
Before using for the first time
16