Filter
Top Products
Using a Memory programme
The same pan must be used in order to
obtain the same cooking result as when
the programme was recorded. The
quantity and size of individual
ingredients must also be the same.
^
Switch the hob on.
^
Touch the M sensor.
P1will show in the Timer/Memory
display.
^
Touch the + sensor until the
programme number you require
shows in the display.
^ Touch the M sensor until a long
audible tone sounds.
The relevant cooking zone switches on
automatically, and switches off once
the programme has run. Whilst the
programme is running, the indicator
lamp for the cooking zone flashes in the
Timer/Memory display, and the
programme number shows alternately
with the remaining time.
Checking the steps of a Memory
programme
^
Switch the hob on.
^
Touch the M sensor.
^
Touch the + sensor until the
programme number you require
shows in the display.
The applicable power level appears in
the appropriate cooking zone display;
the indicator lamp for the cooking zone
flashes in the Timer/Memory display,
and the time programmed for the power
level appears. Times are displayed
rounded up to the nearest full minute,
but when the programme is running the
steps are timed to the second.
Deleting a Memory programme
^ Switch the hob on.
^ Touch the M sensor.
^ Touch the - or + sensor until the
programme number you require
shows in the display.
Touch the - and + sensors at the same
time until a long audible tone sounds,
and the dot after the number is deleted.
Timer and Memory function
31