Filter
Top Products
Cooking zone display
a Displays:
0 = Cooking zone ready for use
^ = Keeping warm function
1 to 12 = Power levels
I = Single Booster I
II = Twin Booster II
# = Residual heat
ß = No pan on cooking zone or pan unsuitable (see "Induction")
F = Fault (see "Safety switch-off")
A = Auto heat-up when the power setting range has been extended
P0 etc. = Programme (see "Programming")
S0 etc. = Status (see "Programming")
b Indicator lamp for extending the power setting range (see "Programming")
c Light ring: The number of curved lines lit up equates to the power setting
chosen (exception: during the "Auto heat-up" phase - See "Auto heat-up").
d This segment lights up when a booster is activated.
Timer/Memory display
a Indicator lamp for relevant zone, e.g. the rear right cooking zone
b Display for Time/Memory programme
00 to 99 = Time
P1 to P5 = Memory programme
c Memory programme indicator lamp
d Indicator lamp for half hours with a minute minder time of more than 99 minutes
Guide to the appliance
6