Filter
Top Products
Memory function
The settings used on a particular
cooking zone from switching on right
through to switching off can be
recorded as a Memory programme. Up
to 5 of your favourite cooking
processes can be saved as Memory
programmes. However, only one
programme can be recorded or used at
any one time.
Memory programmes can be recorded
on any of the cooking zones.
Each cooking zone can have more than
one programme recorded on it.
Programme slots that have settings
memorised to them are indicated by a
dot after the number, for example:
P1Nothing saved in memory
P1. Programme settings are saved in
memory.
If all 5 programme slots are occupied
and you want to save a new cooking
process, you will first have to delete
one of the existing programmes.
Recording a Memory programme
First select a Memory programme, then
the cooking zone in the usual way.
The maximum time that can be
recorded is 99 minutes with a maximum
of 10 changes in power level.
^
Switch the hob on.
^
Touch the M sensor.
P1will show in the Timer/Memory
display.
^
Touch the + sensor until the
programme number you require
shows in the display.
^ Touch the M sensor until a long
audible tone sounds.
^ Within 10 seconds of this, switch on
the cooking zone required.
The recording process now begins.
During recording, the indicator lamp for
the cooking zone being used flashes in
the Timer/Memory display, and the
programme number lights up.
The process will be saved automatically
when the cooking zone is switched off,
or if you touch M until a long audible
tone sounds. After being saved, the
programme steps show in the display.
Times are displayed rounded up to the
nearest full minute, but when the
programme is running the steps are
timed to the second.
Timer and Memory function
30