Filter
Top Products
To switch a cooking zone off
automatically
You can set a time at the end of which
a given cooking zone will switch off
automatically. It is only possible to
programme a cooking zone to switch
off automatically if a power setting has
already been selected for that zone. All
of the cooking zones can be
programmed at the same time.
If the time programmed is longer than
the maximum operational time
allowed, the cooking zone will switch
off after the maximum time allowed
(see "Safety switch off").
^ Select a power setting for the zone
you require, e.g. back right, in the
usual way.
^ Touch the m sensor until the
indicator lamp for the selected zone
flashes.
If more than one cooking zone is
switched on, the indicator lamps will
light up clockwise beginning with the
front left zone.
^
Touch the - or + sensor until the time
you require appears in the display,
e.g. 15 minutes.
The time then counts down in minutes.
The time remaining can be seen in the
Timer/Memory display and changed at
any time by touching - or +.
If you want to set another cooking zone
to switch off automatically, follow the
same steps as described above.
If more than one switch-off time is
programmed, the shortest time
remaining will show in the display, and
the indicator lamp for that particular
cooking zone will flash. All the other
indicator lamps will light up constantly.
If you want to check the remaining time
for another zone, touch the m sensor
until the indicator lamp for the zone you
require flashes.
Timer and Memory function
29