Filter
Top Products
Installation
Flush fit hobs are only suitable for
installation in granite, marble, tiled or
solid wood worktops. Other
materials such as Corian and
Askilan are not suitable. When using
a worktop made from any other
material, please check first with the
worktop manufacturer that it is
suitable for installing a flush fit hob.
Certain models are suitable for
building into glass worktops - please
see advice under "Building-in
dimensions".
This appliance requires a 1000 mm
wide base unit for installation.
This is to ensure that the underside
of the hob is accessible after
installation and that the casing can
be easily removed for maintenance.
If the underside of the hob is not
freely accessible after installation
the seal underneath the hob must be
removed to enable the hob to be
lifted out of the cut-out should this
ever be necessary.
The hob can be installed
–
in a suitable cut-out in a granite or
marble worktop.
–
in a suitable cut-out in a tiled or solid
wood worktop with a wooden support
frame. The frame must be provided
on site, and is not supplied with the
appliance.
Flush-fitted hobs
55