Filter
Top Products
Operation
34
Starting a program
The dishwasher can be started only if
the door is closed.
ĺ Press the Start button.
The program will begin.
The Start indicator light will come on.
A program should only be canceled
in the first few minutes, if at all. Oth‐
erwise important program stages
could be omitted.
Time display
The duration of the program selected
appears in hours and minutes in the
display before the program begins. Dur‐
ing the program, the time left until the
end of the program is displayed.
The program duration displayed may
vary with the same program. It is influ‐
enced by, among other things, the wa‐
ter temperature at each intake, the re‐
activation process, the type of deter‐
gent, the amount of dishware, and the
amount of soiling.
When a program is selected for the first
time, the display shows an average
time for a cold water intake.
The times shown in the program over‐
view refer to standard test loads and
temperatures.
Each time a program is run, the elec‐
tronic module calculates the program
duration required according to the tem‐
perature of the water taken into the
dishwasher and the amount of dish‐
ware.