Filter
Top Products
Frequently Asked Questions
50
With the help of the following guide, minor faults in the performance of the appli‐
ance, some of which may result from incorrect operation, can be put right without
contacting Miele Service. This will save time and money.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
ɘ Unauthorized or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and na‐
tional safety regulations. The manufacturer cannot be held liable for unauthor‐
ized work.
Technical problems
Problem Possible cause and solution
After the dishwasher is
turned on with the ɶ
button, the Start indica‐
tor light does not flash.
The dishwasher is not plugged in.
ĺ Insert the plug.
The circuit breaker has tripped.
ĺ Reset the fuse (see data plate for the correct fuse
rating).
The dishwasher stops
during a program.
The circuit breaker has tripped.
ĺ Reset the fuse (see data plate for the correct fuse
rating).
ĺ If the circuit breaker trips again, contact Miele
Service.