Miele 10 014 070 Dishwasher User Manual


 
Options
42
Optimize Standby
"Optimize Standby" is activated by de‐
fault.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a program.
The dishwasher will not turn off while
a program is running, during the delay
start period, or if there is a fault.
Optimize Standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off au‐
tomatically increases to 6 hours. Doing
this will increase energy consumption.
ĺ Turn the dishwasher off with the ɶ
button, if it is turned on.
ĺ Press the Start button and, simulta‐
neously, switch the dishwasher on
using the ɶ button.
Keep the
Start button pressed for at
least four seconds until the
Start indi‐
cator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
ĺ Press the Ɂ button 8 times.
The Ɂ indicator light will flash 8 times
at short intervals.
The flashing sequence in the display
shows whether or not Optimize Stand‐
by is activated.
ɠɇ: "Optimize Standby" activated
ɠɆ: "Optimize Standby" deactivated
ĺ Press the Start button to change the
setting.
The setting is now stored in memory.
ĺ Turn the dishwasher off with the ɶ
button.