Filter
Top Products
Frequently Asked Questions
52
Water intake fault
Problem Possible cause and solution
The Intake/Drain indica‐
tor flashes on and off.
The water supply is turned off.
ĺ Turn on the water supply all the way.
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code ɖɇɈ or ɖɇɉ ap‐
pears in the display.
Before fixing the fault:
ĺ Turn the dishwasher off with the ɶ button.
There is a problem with the water intake.
ĺ Turn on the water supply fully and start the pro‐
gram again.
ĺ Clean the water intake filter (see "Frequently asked
questions").
ĺ The water pressure at the intake is lower than 4.35
psi.
Contact a plumber.
Water drainage fault
Problem Possible cause and solution
The dishwasher stops
during a program.
The Intake/Drain indica‐
tor flashes.
Fault code ɖɇɇ shows in
the display.
Before fixing the fault:
ĺ Turn the dishwasher off with the ɶ button.
There is a problem with the water intake.
There might be water in the wash cabinet.
ĺ Clean the filter system (see "Cleaning and care -
Filter system").
ĺ Clean the drain pump (see "Frequently asked
questions").
ĺ Clean the non-return valve (see "Frequently asked
questions").
ĺ Remove any kink or loop in the drain hose.