Filter
Top Products
Frequently Asked Questions
51
Problem Possible cause and solution
The Intake/Drain and
Rinse Aid indicator
lights are flashing at the
same time.
Fault number ɖɨɨ ap‐
pears in the display.
There may be a technical fault.
ĺ Turn the dishwasher off with the ɶ button.
ĺ Turn the dishwasher back on after a few seconds.
ĺ Select the desired program.
ĺ Press the Start button.
If the indicator lights flash again, there is a technical
fault.
ĺ Contact Miele Service.
Fault ɖɍɆ:
The drain pump is still
running, even with the
door open.
The WaterProof System has reacted.
ĺ Turn off the water supply.
ĺ Contact Miele Service.
Fault ɖɍɎ: A fault has occurred in the circulation pump.
ĺ Turn the dishwasher off for at least 30 seconds
with the ɶ button.
ĺ Turn the dishwasher back on.
If the fault message appears again, there is a techni‐
cal fault.
ĺ Contact Miele Service.