Filter
Top Products
The On/Off button - (Standby) can be
used to turn the coffee system on or off,
if the main switch at the back of the
machine is turned on.
Turning on
When the machine is turned on, it heats
up and rinses out the pipework. This
cleans and heats the pipework ready
for coffee preparation. After rinsing, hot
water will run into the drip tray.
TIP If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container
underneath the coffee dispensers
before preparing the first coffee of the
day.
If the coffee machine still has an
operating temperature higher than
140°F (60°C), rinsing will not take
place.
^ Press the On/Off button -.
The following will appear in the display:
HEATING UP PHASE
The following appears in the display
after heating up:
RINSING
Hot water will flow from the coffee
dispensers.
The main menu will then appear in the
display:
SELECT TYPE OF DRINK
You can now prepare drinks.
Turning off
^
Press the On/Off button -.
The coffee machine rinses the coffee
pipework before turning off.
If you have made a drink with milk, the
following message appears in the
display:
RINSE THE
MILK SYSTEM
^
Press the OK button to rinse the milk
system.
^
Follow the instructions given in the
display.
The milk system is rinsed out.
If the milk system is not rinsed
before turning off, the message
RINSE THE MILK SYSTEM or CLEAN
THE MILK SYSTEM will appear in the
display next time the machine is
turned on.
Follow the instructions in the display
next time the machine is turned on
(see "Rinsing the milk system").
TIP To save energy, use the main
switch at the back of the coffee
machine to turn it off if it is not going to
be used for a long period of time,
e.g. during holidays.
Please note that the time of day will not
be saved and must be entered again
the next time the coffee machine is
turned on.
Turning the machine On / Off
16