Filter
Top Products
Message Possible cause and solution
The message
SYSTEM
FILLING UP - START
appears in the display
again.
The coffee machine needs descaling and/or the brew
unit filters are blocked.
^
Turn the machine off with the On/Off - button.
^
Press the OK button for 2 seconds and call up
MAINTENANCE - DESCALE.
^
Descale the coffee machine.
^
Remove the brew unit and rinse it under running
water (see "Brew unit").
If the fault message appears in the display again,
^ Degrease the brew unit (see "Cleaning the brew
unit").
If the fault still appears in the display, contact Miele
Technical Service.
The following message is
displayed after turning
on:
RINSE THE
MILK SYSTEM
The milk system was not rinsed prior to turning off last
time.
^ Rinse the milk system (see "Rinsing the milk
system").
CLEAN THE MILK
SYSTEM
appears in the display.
The milk system needs to be cleaned.
^
Confirm this message by pressing the OK button.
^
Clean the milk system (see "Cleaning the milk
system").
DEMO MODE IS ACTIVE
or
DEMO MODE ACTIVE
FUNCTION DEACTIVATED
appears in the display.
The demo setting of the coffee machine for
showrooms or dealers has been activated.
^
Deactivate the demo mode (see "Demo mode").
Frequently asked questions
64