Filter
Top Products
Message Possible cause and solution
The following
appears in the
display although the
water container is
full:
FILL WATER
CONTAINER
AND PLACE IN
THE MACHINE
The water tank is not seated correctly.
^
Remove the water container and then replace it.
If the fault message appears in the display again,
^
empty the water container.
^ Check to see that the float moves freely, by shaking the
water container.
^ Fill the water container with fresh, cold tap water and
replace it in the coffee system.
If the fault still appears, contact Miele Technical Service.
Dispensing stops
and the following
appears in the
display:
PROCESS STOPPED
WATER CONT. EMPTY
There is not enough water in the water container.
^
Fill the water container.
^
Press the OK button.
CONTINUE DISPENSING - YESB appears in the display.
^
Press the OK button to continue dispensing,
or select NO to cancel the preparation.
Frequently asked questions
63