Filter
Top Products
Unusual performance of the coffee machine
Problem Possible cause and solution
When a drink is
selected very little or
nothing at all is
dispensed from the
coffee dispensers.
The brew unit filters are blocked.
^
Clean the brew unit (see "Brew unit").
^
Degrease the brew unit (see "Cleaning the brew unit").
Water has stopped
flowing when
programming the
amount.
The maximum water quantity possible was reached.
Preparation is stopped and the max. portion size possible
is saved.
or
There was not enough water in the water tank. The
programming process is canceled and the setting will not
be saved
^ Fill the water container.
^ Repeat the programming procedure.
The coffee machine
does not rinse itself
when turned on.
This is not a fault.
If the coffee machine still has an operating temperature
higher than 140 °F (60°C), rinsing will not take place.
There is a lot of
"coffee water" in the
waste container.
The grind level is too coarse.
^
Set the grinder control to a finer setting (see "Adjusting
the grinder setting").
^
Adjust the amount of coffee, if necessary (see "Adjusting
the strength of the coffee").
Frequently asked questions
67