~
Fill the bean container only with
roasted whole coffee beans. Do not fill
the bean container with coffee beans
which have been treated or with ground
coffee.
~
Do not reach into the grinder.
~
Only put ground coffee or cleaning
tablets to the ground coffee chute. The
cleaning tablets remove grease from
the brew unit of the coffee machine.
~
Only use plain milk. Flavored milk
products contain substances that can
clog the milk system.
~
Do not use coffee beans which have
been treated with caramel, sugar, or fill
the coffee machine with other
sugar-containing liquids. Sugar
damages the machine!
~
Never place a cup with a burning
alcohol-coffee mixture underneath the
main dispenser. This could cause
plastic parts of the coffee machine to
catch fire and melt.
~
Do not place any open flame, e.g. a
candle, on or near the coffee machine.
The coffee machine could catch fire
and the fire could spread.
~
Disconnect the coffee machine from
the power supply before cleaning.
~
Clean the coffee machine and the
milk flask (depending on model) daily
(for further information see "Cleaning
and Care").
~
Do not use a steam cleaner to clean
this machine. The steam could cause a
short circuit.
~
Descale the coffee machine
regularly with the appropriate number
of Miele descaling tablets for the water
hardness level in your area. Descale
the machine more frequently in areas
with very hard water. The manufacturer
cannot be held liable for damage
arising from insufficient descaling.
~
Degrease the brew unit regularly
with the supplied Miele cleaning
tablets. Depending on the natural oil
content of the coffee used, the brew
unit can become blocked quite quickly.
~
Used coffee grounds from the waste
container should be disposed of with
organic waste or put on the compost
heap Coffee grounds can clog the sink.
For machines with stainless steel
trim:
~
Do not use sticky notes, transparent
adhesive tape, masking tape or other
types of adhesive on the surface of the
trim. These damage the surface,
causing it to lose its dirt repellent
protective coating.
~
The surface of the stainless steel
trim is susceptible to scratching. Even
magnets can cause scratches to
appear.
SAVE THESE INSTRUCTIONS
AND REVIEW THEM
PERIODICALLY
IMPORTANT SAFETY INSTRUCTIONS
7