Filter
Top Products
Additional functions
B u ZZe r
The end of a program and faults can be
announced by a buzzer tone.
The buzzer at the end of a program
sounds five times in intervals with a
brief break in between. The buzzer
sounds up to one hour if the
dishwasher in not turned off.
The buzzer for a fault sounds
continuously. The buzzer sounds for up
to two minutes if the dishwasher is not
turned off or the fault is fixed.
The buzzer is activated by default. It
can be set to off, so it does not sound
at the end of a program. The buzzer for
a fault cannot be set to off.
[] Open the door.
[] Turn the dishwasher off (7.
[] Press the program button and at the
same time turn the dishwasher on I.
Hold the program button until the
lower right program indicator comes
on.
If it does not come on, start over.
[] Press the program button briefly four
times.
The "Intake/Drain" indicator flashes 4
times in intervals.
The upper right program indicator
shows if the program end buzzer is
turned on or off.
- Upper right program indicator
flashes: Buzzer is turned on
- Upper right program indicator is off:
Buzzer is turned off
[] To change the setting, press the
program button until the
"Intake/Drain" indicator lights.
[] Press the program button briefly
three times.
The setting is saved.
[] Turn the dishwasher off (7.
28