Filter
Top Products
Frequently asked questions
Issue
The dishes are not
clean.
Possible fault
The dishes were not loaded
Glasses and
cutlery show
streaks. There is a
bluish sheen on
the surface of
glasses and a film
that can eb wiped
off.
correctly.
The program was not
_owerful enough.
Not enough detergent was
dispensed.
The spray arms are blocked
by items.
The triple filter in the base of
the wash cabinet is not clean
or not correctly inserted. The
spray arm jets might be
clogged.
The drain pump or the
non-return valve is blocked.
Wash water will run back into
the wash cabinet.
The rinse aid dosage is set
too high.
Solution
See "Loading the
dishwasher".
Select a more intensive
program, see "Program
Guide".
Use more detergent, see
"Adding detergent".
Turn the spray arm and
rearrange the dishes if
necessary.
Clean the filter and insert it
correctly.
Clean the spray arm jets.
See "User Maintenance
Instructions".
Clean the drain pump and
the non-return valve, see
maintenance instructions.
Reduce the dosage, see
"Before using for the first
time".
35