Filter
Top Products
Frequently asked questions
Issue
Dishes are still
wet, glasses and
cutlery are
spotted.
White residue is
visible on cutlery
and dishes.
clouding occurs
on glassware and
film can be wiped
off.
Possible fault
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
"2 in 1" products were used.
These products have a low
drying effect.
Not enough rinse aid was
used.
Unsuitable "2 in 1" or "3 in 1"
_roducts were used.
Solution
Increase the dosage, refill the
reservoir or switch the rinse
aid product when refilling, see
"Before using for the first time".
Leave dishes in longer, see
"Use".
Use powder detergent and
add rinse aid.
Increase the dosage, see
"Before using for the first time".
Use a different detergent,
normal tabs or normal powder
detergent.
36