Filter
Top Products
Before using for the first time please
pay special attention to the following
points.
Detailed information on these points
can be found in the relevant sections of
these Operating Instructions.
Set the water softener unit
The water softener unit must be set for
the water hardness level in your area.
The salt reservoir also has to be filled,
first with water
and then with
reactivation salt.
,
Filling the salt reservoir with
cleaning agent by mistake will cause
serious damage to the water
softener. Please check every time
before refilling that the package
contains reactivation salt.
Add rinsing agent
,
Inadvertently filling the reservoir
for rinsing agent with cleaning agent
(including liquid cleaning agents
and washing up liquid) will cause
serious damage to the reservoir.
Only use designated cleaning agents
for special applications.
Do not use cleaning agents formulated
for use in domestic dishwashers.
Load the machine carefully
Arrange the load so that water will
come into contact with all surfaces.
Concealed surfaces will not be
cleaned.
The spray arms must not be blocked by
any items.
Add cleaning agent
Follow the cleaning agent
manufacturer’s recommendations on
dosage.
The amount required will depend on the
type of cleaning agent and the
programme chosen.
Make sure you read the notes on
dosing given in the programme chart.
Cleaning results may vary from brand
to brand. If you are not satisfied with
the results from one brand, try another
quality brand before contacting Miele
for advice.
The filter combination at the base of
the wash cabinet and the spray arms
must be kept clean.
Regular checking and cleaning is
essential.
Before using for the first time
11