Filter
Top Products
7. Re-setting all parameter changes
back to the factory settings.
^
Turn the programme selector to STOP
f.
^
Switch the machine off.
^
Press and hold 4 and 6 at the
same time, and whilst doing so
switch the machine on with the I-0
button.
The current programme status “P...”
appears in the display and the p / 6
indicator lights up.
^
Press 3 seven times, E07 for
programming level 7 will appear in
the display.
^ Turn the programme selector to any
switch position (except STOP).
00 or PP will appear in the display.
00 = factory setting
(Electronics have not been
re-programmed).
PP = Electronics have been
re-programmed.
^
If PP is displayed press 4 to
change from PP to 00.
^
Press 6. SP appears.
^
Press 6 again. All values which had
been changed have now been now
reset to the factory settings.
If the hardness level setting in the water
softener had been changed this will
reset to the factory setting of 19 °d (3.4
mmol/l). This will need to be reset to
suit the hardness level in your area.
Programming special functions
39