Filter
Top Products
6. Audible tone (Buzzer)
This special function allows you to
programme a buzzer (lasting up to a
maximum of 30 seconds) for the
following functions:
–
Programme end = Constant buzzer
–
Fault warning = Buzzer at one
second intervals
^
Turn the programme selector to STOP
f.
^
Switch the machine off.
^
Press and hold 4 and 6 at the
same time, and whilst doing so
switch the machine on with the I-0
button.
The current programme status “P...”
appears in the display and the p / 6
indicator lights up.
^ Press 3 once. E01 for programming
level 1 will appear in the display.
^ Turn the programme selector nine
switch positions clockwise (9 o’clock
position).
A number from 90 to 93 will appear in
the display.
90 = buzzer switched off.
91 = buzzer at end of programme
(standard setting)
92 = fault indication
93 = buzzer for all functions (at end
of programme and for faults).
^
Press 4 until the required function is
displayed.
^
Press 6. SP appears.
^
Press 6 again. The change has
been recorded.
Value set:
Note:
The buzzer can be switched off early
by
–
turning the programme selector to
the STOP position f,
–
interrupting the power supply (e.g.
by opening and closing the door).
Programming special functions
38