Filter
Top Products
Switching on
^
Close the door.
^
Open the stopcocks (if turned off) .
^ Press the I-0 button.
When the programme selector is at the
STOP position f a point lights up in the
display.
Starting a programme
^ Turn the programme selector
clockwise or anti-clockwise to the
required programme.
The temperature of the programme
selected is shown in the display,
except with PRE-RINSE D and
DRAIN 6.
The indicator light next to the START
button 6 flashes.
^
Select additional function DRYING
3 if required (see "Selecting an
additional function").
^
Press the START button 6. The
duration of the programme selected
will appear in the display, counting
upwards in minutes.
The indicator light next to the START
button lights up.
Once the programme has started, all
other programmes are blocked. If the
programme selector is then turned to
another programme, the values shown
in the display go out. The values can be
seen again if the programme selector is
turned back to the position of the
programme currently in operation.
^ Press the 4 button to alternate
between showing the current
temperature and the amount of time
elapsed in the display.
Note that during the heat-up stage in
"Main wash" and "Final rinse" the
required end temperature is shown in
the "time run" display.
Operation
30