Filter
Top Products
3. Delay start and setting the delay
start time
The start of a wash programme can be
delayed by up to 9 hours and 30
minutes in 30 minute stages.
Note:
Delay start should only be selected with
the Universal and Intensive
programmes. Because items in the
machine stand for a longer period
before being cleaned, residues can dry
on if the start time is delayed. Shorter
programmes may not be able to
remove dried on soiling adequately.
a) To activate Delay Start
^ Turn the programme selector to STOP
f.
^ Switch the machine off.
^ Press and hold 4 and 6 at the
same time, and whilst doing so
switch the machine on with the I-0
button.
The current programme status “P...”
appears in the display and the p / 6
indicator lights up.
^
Press 3 once. E01 for programming
level 1 will appear in the display.
^
Turn the programme selector to 6.
80 or 81 will appear in the display.
80 = No delay start
81 = Delay start active.
^
Press 4 to change from 80 to 81 or
vice versa.
^
Press 6. SP appears.
^
Press 6 again. The change has
been recorded.
Value set:
b) Setting the delay start period
The delay start period (from 30 minutes
to 9 hours and 30 minutes) has to be
set before
a programme is started.
^
After selecting a programme (see
“Switching on”) Press the 4 button
or hold it in until the required value is
displayed. The “Delay Start” indicator
light comes on.
After the START button 6 has been
pressed the delay start period will
count down in the display until the
programme automatically starts.
Programming special functions
34