Filter
Top Products
Changing a programme
Provided the START button has not yet
been pressed, a wrongly selected
programme may be changed as
described below (if it has been
pressed, see Cancelling a programme):
^
Turn the programme selector to the
required programme.
^
Select additional function DRYING
3 again if required (see Selecting
an additional function).
^
Press the START button 6.
Selecting an additional function
The following additional function can be
selected:
^ 3 DRYING
Drying may be selected as an
additional function as soon as the
programme has been selected
(except with PRE-RINSE D and
DRAIN 6). The drying phase
operates with pulsed heating for ten
minutes. The total running time of the
programme lengthens accordingly.
Programme sequence indicators
The indicator light for the active
programme stage lights up during the
programme.
k Reactivation
I Pre-wash
l Main wash
m / H Interim rinse/Final rinse
c Drying (additional function)
Programme end
The programme has ended when no
more programme sequence indicator
lights are lit up and the "Start" indicator
light 6 has gone out. A 0 will appear in
the middle of the display.
The buzzer will sound at the same time
for a max. of 30 seconds (standard
setting). The buzzer can be changed
(see "Programming special functions").
Use the 4 button to see the total
running time of a programme or the
actual temperature.
Switching off
^ Press and release the I-0 button.
Operation
31