Filter
Top Products
Safety features
System lock
This safety feature prevents functions
being entered unintentionally. See
("Settings - Safety").
Safety cut-out
A process using a traditional oven
function can be started without
programming in a time. To prevent
over-use and the consequent danger of
fire, the appliance switches off
automatically after a certain length of
time. This can be between 1 hour and
10 hours depending on the function
and temperature chosen.
If the microwave is switched off in
between using two microwave cooking
processes, there will be a delay of
about 30 seconds before the new
setting is accepted. Therefore wait a
short while before starting the second
process.
Energy saving functions
Door contact switch
If the door is opened during a
programme the heater element and fan
are automatically switched off.
The programme will continue to run
again as soon as the door is shut and
the start button has been pressed. If
the door is opened during a
conventional programme, i.e. one
without microwave power, the
programme will continue to run again
as soon as the door is shut. You do not
need to press the start button.
Making use of residual heat
With Fan plus and Auto roast the
heating shuts off automatically if the
ambient temperature is sufficient to
finish cooking the food and the door
has not been opened. Whenever heat is
lost, e.g. if the door is opened, the
heating will switch on again
automatically.
Optional oven interior lighting
You can turn off the oven interior
lighting if you do not want it to remain
on during the entire cooking process.
Modes of operation
21