Filter
Top Products
Selecting "Settings J" in the main menu
allows you to select or change the
following options:
Language J
You can alter the language currently
set. Once changed, all display text will
appear in the new language.
If you change to another language by
mistake, a flag symbol next to the
language makes it easy to locate
quickly even if you do not understand
the language.
To find the language again: Select the
last option (Settings) in the main menu,
then from the sub-menu select the last
option (Language).
Time of day
You can choose between a 24 hour
clock or a 12 hour clock.
Light
You can choose between the default
setting of the light coming "on for
15 seconds" and "on". If you keep the
default setting, the light in the oven
interior will go out 15 seconds after the
programme has started. If you press
the ON/OFF switch or the multi-function
dial, the light will come on again for
another 15 seconds. If you select "on"
the light will remain on during the entire
programme.
Main menu
The first three options in the main menu
can be allocated to programmes which
you use more frequently than the
pre-set programmes, Quick MW,
Microwave and Fan plus. Each option is
shown as a position and can be
changed. You can select other options
from the range of functions and from
your user programmes.
Confirming "Continue" will take you
through the three positions. You can
either choose a different option for the
position or keep the pre-set
programme. Once you have chosen
the programmes for all three positions,
keep confirming "Back" to take you
back to the main menu.
Quick MW
This setting is for when you want to use
the microwave quickly. It has a pre-set
power level of 1000 W and will operate
for a duration of 1 minute. You can alter
these pre-set values.
Keeping warm (MW only)
When using functions with microwave
power, a warming function is activated
as standard. Food will be warmed for a
certain period if it is not removed from
the appliance at the end of the
programme. You can switch the
warming function off. The warming
function cannot be set as a separate
function.
Settings
36