Miele H 4060 BM Microwave Oven User Manual


 
This appliance complies with all
relevant legal safety requirements.
Improper use can present a risk of
both personal injury and material
damage.
To avoid the risk of accidents and
damage to the appliance please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on installation,
safety, operation and care of the
appliance.
Keep these instructions in a safe
place and pass them on to any
future user.
Correct use
The appliance is intended for
domestic use only: to cook food,
and in particular to defrost, reheat,
cook, bake, roast and to grill. Any other
usage is not supported by the
manufacturer and could be dangerous.
The manufacturer is not liable for
damage resulting from incorrect or
improper use of the appliance.
Never use the appliance to store or
dry items which could ignite easily.
Moisture evaporates. Fire hazard.
The use of the appliance by the
elderly or infirm or those who have
not used the appliance before should
be supervised by a competent and
responsible person to avoid the risk of
injury.
This appliance is not a toy! To
avoid the risk of injury, keep
children well away and do not let them
play with it or use the controls. They will
not understand the potential dangers
posed by it. They should be supervised
whenever you are working in the
kitchen.
Older children may use the
appliance only when its operation
has been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
Technical safety
If the connection cable is
damaged, the new cable must be
fitted by a Miele approved service
technician.
Do not use the microwave function
of the appliance if
- the door is warped,
- the door hinges are loose,
- holes or cracks are visible in the
casing, the door, the door seal or the
oven interior walls.
Operating the appliance with this type
of damage will result in microwave
leakage and present a hazard to the
user.
Never open the casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous and can cause
operational faults or electric shock.
Warning and Safety instructions
6