Filter
Top Products
ß
Use in main menu
You can place up to three user
programmes in the Main menu.
Changes to the Main menu can be
reset via "Settings - Factory default -
- Main menu".
To create a User programme
If programmes already exist under
User programmes, the "Create"
option has to be selected in order to
save additional programme stages to
memory.
Then continue following the
instructions below.
^ Select the "User programme" menu.
^ Select and confirm the cooking
function you want.
^ Alter and confirm the pre-set
recommended temperature if
required.
^ Select a duration, or a core
temperature if using the food probe,
and confirm your selection.
^
Check the settings and confirm them
with "Continue".
^
You can add more cooking stages,
for example, if you want to add
another cooking function to follow on
from the first.
Proceed as described above.
^
Finally set the shelf level to be used.
After confirming with "Continue", select
the name given in the display, or enter
your own name. To do this:
^
Use the sensors next to arrows
) *
to select a character.
^
When the letter or number you want
is highlighted, confirm it with "Select
character". The letter or number you
have selected will appear in the top
line of the display after "Name".
^
Select the rest of the letters or
numbers for your programme name.
You can use the "Delete character"
option to correct any wrong entries.
Select "Space" where a space is
required.
^ Confirm the programme name with
"OK".
To call up an existing User
programme
^ Select "User Programmes" from the
main menu, and then the "Select"
option. Programmes saved under
User programmes will then appear in
the display.
Operation
35