Filter
Top Products
Heating-up phase
The heating-up phase works as follows
with the Fan plus, Conventional heat
and Auto roast functions:
ß
Rapid
(Factory default)
All the heating elements are
switched on together in order to heat
the oven up as quickly as possible to
the required temperature.
R and "Rapid heat-up phase" or
"Rapid searing phase" will appear in
the display.
ß Normal
Only the heating elements for the
cooking function selected are
switched on.
3 and "Heating-up phase" or
"Searing phase" will appear in the
display.
Start
ß Automatic
(Factory default setting)
A programme will start automatically
approx. 20 seconds after making
your last entry without having to
select Start.
ß
Manual
If "Manual" has been selected, "Start"
will appear at the beginning of each
programme and must be confirmed
before the programme will start.
Recommended temperatures
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
The recommended temperatures is
displayed next to the function.
When you select a function the
recommended temperature is
highlighted.
The setting range available will also
appear.
Display
Contrast
The contrast is represented by a bar
with seven segments.
P P P P G G GM
Factory default: Four illuminated
segments.
To change the contrast touch the
sensor next to "Lower" or "Higher".
Brightness
The brightness is represented by a bar
with seven segments.
P P P P G G GM
Factory default: Six illuminated
segments.
To change the brightness touch the
sensor next to "Darker" or "Lighter".
Settings
49