Filter
Top Products
Main menu
You can change the order in which
options appear in the Main menu. Up to
three options can be placed at the
beginning of the Main menu (excluding
Settings).
When you select this option you will be
prompted to set positions 1, 2 and 3.
You will be given the choice of
selecting a standard oven function or
an Automatic programme or a User
programme for each position. After
selecting and confirming one position
you will be prompted to set the next
one.
Once you have set all three the list will
appear in the display.
If you have already placed a User
programme at the beginning of the
Main menu (see "User programmes -
Use in main menu"), the next one will be
added to the list.
Catalyser
ß
On
(Factory default)
The catalyser is always switched on.
ß
Off next programme only
The catalyser will be switched off for
the next programme only.
Cooling fan run-on
The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
ß
Temperature controlled
(Factory default)
The cooling fans will switch off when
the temperature in the oven
compartment drops below approx.
70 °C.
ß
Time controlled
The cooling fans will switch off after
approx. 25 minutes.
Do not leave food in the oven to
keep it warm if you have set the
cooling fans to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
Condensate can
– damage the housing unit/
worktop.
– lead to corrosion in the oven.
Settings
48