Filter
Top Products
Problem Possible cause and remedy
There are spots like
rust on the catalytic
surfaces.
When roasting on the rack, the circulating air sometimes
picks up spices, which are then deposited on the oven
interior walls. These residues are not removed by catalytic
cleaning, and should be removed while fresh with a mild
solution of hot water and washing-up liquid applied with a
soft brush.
"Maximum operating
duration reached"
appears in the
display.
Safety switch-off has been activated.
The appliance will be ready for use again after it has been
switched off and then back on again.
The oven has
automatically
switched itself off
after a cooking
programme.
The oven switches off automatically to save energy if, at the
end of an Automatic programme or a cooking programme
with Automatic switch-off, no other cooking function is
selected within a certain time period.
The oven is ready for use again when you switch it on.
A fault code
appears in the
display:F+a
number
You can rectify the faults with the following codes yourself:
– Fault 54: The food probe is faulty.
The message will go out as soon as the food probe is
removed from the oven. A replacement can be ordered
from your Miele Dealer or the Miele Spare Parts
Department.
For all other fault codes please contact the Miele Service
Department.
Problem solving guide
72