Filter
Top Products
^
Push the pin e up and out.
Now the soft-close mechanism and the
appliance are no longer connected.
^
Remove the panel a.
^
Push the shock absorber arm f as
far as possible towards the handle
side.
^
Loosen the three screws g on the
soft-close mechanism and the
spacer.
^
In the middle, pry out the housing
with the soft-close mechanism using
a flathead screwdriver.
^
Then, pry the housing with the
soft-close mechanism out of the
retainer from the appliance side.
^
Lay the soft-close mechanism aside.
^
Push out the spacer towards the
hinge side.
^
Lay the spacer aside.
Removing the bottom door of the
appliance:
^
Close the bottom door of the
appliance.
^ Pull the bearing pin i in the middle
of the appliance up and out.
^ Carefully lift and remove the bottom
door of the appliance and set aside.
^ Pull the cover d off.
^
Unscrew the hinge bracket e, rotate
it 180°, then screw it onto the
opposite side.
^
Turn the plastic cap h 180° and
replace it on the hinge bracket k in
the middle.
^
Now place the cover l on the other
side.
Changing the door hinging
53